GIS LPM250-Electric chain hoist LP D8

Electric chain motors D8

The D8 motor corresponds to a standard industrial electric chain hoist in accordance with EN14492-2 and IGVW SQP2:2018 with the difference that the D8 motor is usually used without a handheld controller and in mobile event technology climbing on its chain. As an additional securing measure, the installation of a secondary safety component is required to fix the load. GIS motors in D8 execution are applicable as climbing or stationary hoists without modification up to 3200 kg lifting capacity in single fall operation or 6300 kg in double fall operation. A second, independent brake can be assembled to the hoist in a few simple steps.

Electric chain hoist LP D8

Reliable and long-lasting

3 year warranty

Aluminium casing and cover

Weatherproof: Protection class IP65 as standard

Easy to operate

Quiet running: with 3-step drive and helical gearing

Simple: Polygonal design for an easy maintenance

Usable as stationary or climbing hoist without modification

Customer specific

Different operating and control voltages

Easy assembly of a second brake

Wide range of accessories and options

Electric chain hoist LP D8

Reliable and long-lasting

3 year warranty

Aluminium casing and cover

Weatherproof: Protection class IP65 as standard

Easy to operate

Quiet running: with 3-step drive and helical gearing

Simple: Polygonal design for an easy maintenance

Usable as stationary or climbing hoist without modification

Customer specific

Different operating and control voltages

Easy assembly of a second brake

Wide range of accessories and options

Customer's benefit

Powerful

The case hardened and manganese phosphated profile steel chain provides about 15 % more capacity at an identical nominal diameter when compared to the traditional round steel chain. The larger cross-sectional area reduces wear and increases the lifetime of the chain. The load hook with stable, guided hook latch and safety rubber buffer provides maximum safety.

Weatherproof

The cathodic dip-paint coating (KTL coating) offers good protection against mechanical wear and high UV resistance. A feature of the hoist motor is the protection class IP65. It is dust proof and protected against water jets. The LP is perfectly suitable for outside use, even under the most arduous conditions. On open-air events or on concert tours, the rigging professional will appreciate  the weather resistance and reliability of these electric chain motors.

Brake

The DC spring-loaded brake allows safe braking of the load with optimum braking efficiency. The second brake can be mounted on the existing shaft and independently monitored. This proven brake system is highly reliable and easy to maintain.

Compact

LPM250 and the LP500 are modular in design with compact construction which is why they are perfectly suited for integration in trusses. LPM250 fits in the 300 mm square truss and LP500 in the 400 mm square truss. Regardless of its compact size, wearing parts can be replaced in a simple manner, making it the hoist technicians’ friend as well.

Accessories & options

• Limit switch for direct control (LP500 and LP1000)
• 42 V low voltage control with geared limit switch
• Worldwide operating and control voltages
• Second, independent brake
• Lifting speeds up to 32 m/min at 50 Hz
• Safety load locking hook
• Geared limit switch with two additional emergency stops
• Safety radio remote control
• Ergonomic control switch on cable
• Preparation for encoder on chain wheel or rotor shaft
• Incremental encoder for path measurement
• Eyebolt or hook suspension for load sensor
• Load sensor 0 - 10 V or 4 - 20 mA, mechanical protection
• Temperature monitoring
• Chain container for various lifting heights
• Handles
• Brake monitoring
• Flight Cases (4 x LPM250, 2 x LP500, 1 x LP1000)
• Controller: Group controls / frequency controls
• Power and control cable with plug
• Push trolley and motorised trolley