Log in Sign up
GIS LP1000/N-Electric chain hoist LP C1
Μην διστάσετε να επικοινωνήσετεμαζί μας στο T.: +30 210 9402526
Electric chain motors C1
The GIS motor in C1 version is an electric chain hoist which is specifically developped, rated and designed for holding and moving loads above people. It is light and compact in design and thus perfectly suited for mobile use and responds to the requirements in accordance with EN14492-2, IGVW SQP2:2018 and EN17206. Due to the modular design of the GIS chain hoist, the path and load measurement can be implemented in a simple way. Encoders for path measurement can be mounted on the chain wheel or on the rotor shaft. Due to the high power reserve of the motors, the chain hoists have an excellent synchronisation during group movements. GIS motors in C1 version also cover high lifting speeds up to 32 m/min. (50 Hz).
Electric chain hoist LP C1
Reliable and long-lasting
- Robust: 3 year warranty
- Proven DC spring brake, with or without monitoring
- Weatherproof motors: Protection class IP65 and KTL-coating for hard outdoor use
Easy to operate
- Quiet running: with 3-step drive and helical gearing
- Powerful built-in motor, speed up to 32m/min
- Simple: Polygonal design for an easy maintenance
Customer specific
- Preparation for load and path measurement
- Suitable for frequency inverted operation
- Wide range of accessories and options
Customer's benefit
For both path and load measurement, additional components and electrical parts can be easily integrated in the chain hoist. On the drive shaft and/or the chain wheel, the installation of incremental or absolute encoders is prepared for path measurement. Special eyebolt and hook suspensions allow easy installation of a load measuring pin for load measurement. Our partners who develop and supply the control for multiple hoists value this highly.
All LP motors are equipped with a 3-stage self-contained gear. The helical gearing with geometric optimisation and the chain wheel with minimum 5 pockets ensure extremely quiet running. This allows the quiet handling of loads during events. Thanks to the sound absorption of the transmission the sound pressure level of the LP500 is only 60 dB.
Accessories & options
- Worldwide operating and control voltages
- Lifting speeds up to 32 m/min at 50 Hz
- Load measuring pin: Output signal 4 – 20 mA
- Mechanical protection for load sensor
- Preparation for path measurement with absolute encoder on chain wheel, without encoder
- Preparation for path measurement with incremental or absolute encoder on rotor shaft (without encoder)
- Safety load locking hook
- Temperature monitoring
- Brake surveillance independent for first and second brake
- Additional rectifier
- Chain container for various lifting heights
- Handles
- Customised adjustments for cable connections
- Flight cases (2 x LP500, 1 x LP1000)
- Push and motorised trolleys
| SPECIFICATIONS | |
| Technical specifications | Standart Version C1 motor In accordance with EN14492-2, SQP2:2018, DIN56950, EN17206 Maximum load capacities LP500: 400 kg, LP1000: 800 kg, LP1600: 1250 kg, LP2500: 2000 kg Chain safety Minimum 10:1 Standard voltages 3 × 400 V / 50 Hz, 3 × 230 V / 50 Hz 3 phase motor 1 or 2 lifting speeds Control Interface for control system provided by the customer Suitable for frequency inverted operation Limit switch Geared limit switch with two additional emergency stops Protection class IP65 Load measurement Eyebolt or hook suspension with load sensor: output signal 0 - 10 V Path measurement Incremental encoder on chain wheel Use Usable as stationary or climbing hoist Isolation class (motor) F Material Housing and cover made of aluminum Colour Housing, chain and equipping parts black Brakes Two independent DC spring-loaded brakes Load hook With interlocking hook lug, dampening system Overload protection No slipping clutch, overload shutdown by client |
.jpg)
.jpg)
.jpg)
.jpg)
