The Ai41 is a 2-way passive ultra-slim column loudspeaker specifically designed to ensure a minimal-discreet visual impact and an elegant design for an easy and seamlessly layout integration while ensuring the sound quality for which Outline has always been recognized.
This tiny, modular, externally powered loudspeaker provides the best performance when installed on a flat surface. It features four 1.3” neodymium magnet driver and one 0.7” treated silk dome tweeter producing a wide nominal dispersion and a maximum SPL peak of 107.5 dB.
With a nominal impedance of 8 ohms and requiring only one single channel, it is possible to deploy up to four Ai41 with just one single amplification channel on a parallel cost-saving installation solution.
Also, a passive crossover (manufactured with top-grade components) takes care to split the LF and HF and provides single and double protection for the drivers (LF and HF respectively).
All the above enclosed in a compact, refined and elegant design weighting just 0.6 kg (1.3 lb).
The cabinet, in HCDF (Hydrophobic Compact Density Fiber), is coated with polyurethane paint ensuring the correct operation even in the toughest places; while the grill, made of galvanized steel, features an epoxy powder coating. Custom RAL colour options are available to perfectly match any architectural layout.
SPECIFICATIONS | |
Technical specifications | PERFORMANCE SPECIFICATIONS Frequency Response (-10 dB) 280 Hz – 20 kHz Horizontal Dispersion 160° Vertical Dispersion 60° Impedance (Nom / Min) 8 Ω / 9.2 Ω Watt AES (Peak) * 160 W Maximum SPL Output ** 107.5 dB SPL * according to AES2-2012 (+12 dB) standard ** calculated using +12 dB Crest Factor signal (AES2-2012), Half space PHYSICAL Component Low 4 x 1.3” NdFeB Full Range driver Component High 0.7″ treated silk dome tweeter Connector 2-pin Euroblock Cabinet Material HCDF (Hydrophobic Compact Density Fiber) Cabinet Finish Black or White textured polyurethane paint (overpainted RAL colors on request) Grill Epoxy powder coated Installation points 2 through holes diam. 4 mm on front / 2 x M4 on back Height 350 mm – 13 6/8” Width 46 mm – 1 6/8” Depth 25 mm – 1” Weight 0.6 kg – 1.3 lb |