Log in Sign up
MADRIX STELLA
Μην διστάσετε να επικοινωνήσετεμαζί μας στο T.: +30 210 9402526
The 2-port network node with RDM support for solid-state projects.
It
makes sure that your carefully selected DMX fixtures reliably light up
with vivid colors and smooth animations. It syncs across ports and
different devices to make sure the lighting always looks amazing.
Controlling 2 DMX universes, you can choose output or input for each port, which directly connect to DMX512.
But
that's not all. MADRIX STELLA supports Remote Device Management. It is
no longer only about sending out control data. Devices now respond. This
enables unprecedented possibilities for remote configuration and
monitoring.
While previously unheard of, lighting control with
Art-Net and supervision with RDM are even possible at the same time,
continuously during live operation.
The MADRIX STELLA is a dedicated control interface for DMX512 and Art-Net or Streaming ACN that is designed for high quality and practicability in permanent LED installations.
Art-Net / Streaming ACN / USB
Art-Net
or Streaming ACN data is directly converted to DMX512. Optimize and
decentralize cabling to cover any distance to the device using Ethernet
network. In addition, simply connect to MADRIX 5 over USB.
Easy Configuration
MADRIX
STELLA offers powerful features. Managing the device is still quick and
easy. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal.
3rd-Party Controllers
MADRIX
STELLA complies with official protocol specifications and can be used
as a regular node with your other consoles, controllers, or software
solutions.
Designed For DIN Rails Or Walls
Its
non-conductive enclosure and standardized design for 35 mm top-hat
rails make mounting quick, easy, and safe. 2 extra brackets are provided
for optional wall mounting. 9 indicators quickly show the device status
with the option to turn them off.
2 DMX-IN/OUT
Directly
connect DMX512 to the two 3-pin screw terminals to distribute 2 DMX
universes per unit as input and/or output, eliminating the need for XLR
connectors as a result. Simply use several units at the same time for
larger projects.
Sync Mode
MADRIX
5 and MADRIX hardware allow you to fully synchronize Art-Net data for
all output ports and across multiple devices to get an optimal image on
the LEDs without visual interruptions.
RDM & Daisy-Chain Support
2
Ethernet ports allow for separate network connections as well as
linearly daisy-chaining several devices together. On top, the device
supports the Remote Device Management standard.
Invaluable Features
The
device is ready within seconds after startup. HTP merging is
automatically available for two Ethernet sources. Its firmware is
upgradable. Access and change specific device settings using the
built-in web configuration page.
.
Connectivity
- 2x DMX-IN/OUT (via pluggable screw terminals)
- 2x RJ45 Ethernet ports
- 1x USB port
- 1x Power (via pluggable screw terminal)
Package Contents
- 1x MADRIX STELLA
- 1x Set of screw terminals (2x 3-pin and 1x 2-pin)
- 1x USB 2.0 cable (certified)
- 2x Wall-mount brackets
- 1x Technical manual / quick start guide
| SPECIFICATIONS | |
| Technical specifications | Supply Of PowerDC 5 V – 24 V; over A) 2-pin, pluggable screw terminal or B) 5 V USB Power Consumption< 1.5 W (300 mA) during normal operation (500 mA max. fused) Network ProtocolsArt-Net (I, II, 3, 4, incl. ArtSync), Streaming ACN (sACN / ANSI E1.31) RDM RoleTransmits commands and requests to RDM Responders and back (Art-Net Node / RDM Controller) RDM Responder Count170 RDM Responders max. can be discovered per port DMX5122x 512 DMX channels, input and/or output (Automatically per port) Ports2x ports (Via 2x 3-pin, pluggable screw terminals) Ethernet2x RJ45, Auto MDI-X, daisy-chain support, 10/100 MBit/s (Compatible with 1 GBit/s) Ethernet SwitchLookup Table (ALU) for 1024 unicast MAC addresses USB1x port, USB 2.0, type-B female socket Handling5 status LEDs (+ 4 network status LEDs) CaseNon-conductive, V-0 flammability rating (UL94 test method), designed for 35 mm DIN-rails or wall mounting Dimensions90 mm x 70 mm x 46 mm (Length x Width x Height) Weight108 g | 125 g incl. screw terminals and wall mounts Temperature Range-10 °C to 70 °C (Operating) | -20 °C to 85 °C (Storage) Relative Humidity5 % to 80 %, non-condensing (Operating / Storage) IP RatingIP20 CertificatesCE, EAC, FCC, RoHS Warranty5 years of limited manufacturer's warranty |
