MADRIX NEBULA

AVAILABLE SOON
P/N: IA-HARD-001018
Manufacturer: MADRIX

Features

The versatile LED pixel-tape driver to directly control over 50 supported SPI protocols

Μην διστάσετε να επικοινωνήσετε
μαζί μας στο T.: +30 210 9402526

DESCRIPTION

The versatile LED pixel-tape driver to directly control a wide range of digital LEDs.

MADRIX NEBULA delivers on that promise. This output controller directly connects to a wide range of digital LEDs.

It supports over 50 ICs, each usually offering several frequencies. With regular additions to this list, you are free to choose the best available solution for any current, future, or maintenance work.

The many options to wire power, data, and integrate the device allow you to face the most challenging installs. While our world-class support team is here for you, highly detailed illustrations in the manual are there with you.

And despite the serial nature of the signal, MADRIX NEBULA makes sure that not a single one of the 1,360 individual RGB pixels lags behind.

MADRIX NEBULA empowers new designs for you to create exciting experiences.

The MADRIX NEBULA directly connects to your LED pixels. This advanced SPI decoder receives control data over Ethernet network or USB and is built to provide excellent image quality.

SPI Converter & Direct Connection

Directly connect to a wide range of supported LEDs via two 4-pin screw terminals. A signal frequency of up to 24 MHz is available. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal.

Art-Net / Streaming ACN / USB

Network data is directly converted to SPI without the need for an additional interface. Reliably distribute data from any compatible software or hardware controller. In addition, simply connect to MADRIX 5 over USB.

Designed For DIN Rails Or Walls

Its non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 9 indicators quickly show the device status with the option to turn them off.

Quality Output Of 8 Universes

Each device drives up to 1,360 RGB pixels while ensuring responsive delivery of high-quality signals to each individual LED. You can choose the output protocol separately for each of the two ports.

Sync Mode & Daisy-Chain Support

MADRIX 5 and MADRIX hardware allow you to fully synchronize Art-Net data for all ports and across devices to get an optimal image on the LEDs without visual interruptions. 2 Ethernet ports allow linearly daisy-chaining several devices together.

Invaluable Features

The device is ready within seconds after startup. HTP merging is automatically available for two Ethernet sources. Its firmware is upgradable. Access and change specific device settings using the built-in web configuration page.

Connectivity

1x Power (via pluggable screw terminal)
1x USB port
2x RJ45 Ethernet ports
2x OUT (via pluggable screw terminals)

Package Contents

1x MADRIX NEBULA
1x Set of screw terminals (2x 4-pin and 1x 2-pin)
1x USB 2.0 cable (certified)
2x Wall-mount brackets
1x Technical manual / quick start guide

TECHNICAL DATA

SPECIFICATIONS
Technical specifications	Supply Of Power DC 5 V – 24 V; over A) 2-pin, pluggable screw terminal (12 A max.), B) 5 V USB, C) Port 1 or 2 sourced from LEDs; 6 A max. load per port when supplying through to LEDs Power Consumption < 1.5 W (300 mA) during normal operation (500 mA max. fused) Network Protocols Art-Net (I, II, 3, 4, incl. ArtSync), Streaming ACN (sACN / ANSI E1.31) Data Output 8x 512 channels SPI TTL (Maximum output per port: 680 RGB LEDs / 512 RGBW LEDs / 2048 1-channel LEDs) Supported LEDs APA101, APA102, APA104, APA106, GS8206, GS8207, GS8208, GW6201, GW6205, LPD1882S, LPD6803, LPD8806, MBI6024, MBI6120, MY9291, P9883, SJ1221, SK6112, SK6805, SK6812, SK6813, SK6822, SK9816, SK9822, SK9826, SM16703, SM16716, TLC5973, TLS3001, TLS3008, TM1803, TM1804, TM1809, TM1812, TM1814, TM1829, UCS512B3, UCS1903, UCS2603, UCS2903, UCS2904, UCS5603, UCS8904, UCS9812S, VS17822, WS2801, WS2803, WS2811, WS2811S, WS2812, WS2812B, WS2813, WS2814, WS2815, WS2818, WS2821, WS2822S, WS2822S Addressing As of January 2023. Additional LED types will be supported with future firmware updates. Multiple frequencies are often available per type. Ports 2x ports (Via 2x 4-pin, pluggable screw terminals) Ethernet 2x RJ45, Auto MDI-X, daisy-chain support, 10/100 MBit/s (Compatible with 1 GBit/s) Ethernet Switch Lookup Table (ALU) for 1024 unicast MAC addresses USB 1x port, USB 2.0, type-B female socket Handling 5 status LEDs (+ 4 network status LEDs) Case Non-conductive, V-0 flammability rating (UL94 test method), designed for 35 mm DIN-rails or wall mounting Dimensions 90 mm x 70 mm x 46 mm (Length x Width x Height) Weight 110 g \| 132 g incl. screw terminals and wall mounts Temperature Range -10 °C to 70 °C (Operating) \| -20 °C to 85 °C (Storage) Relative Humidity 5 % to 80 %, non-condensing (Operating / Storage) IP Rating IP20 Certificates CE, EAC, FCC, RoHS Warranty 5 years of limited manufacturer's warranty

SPECIFICATIONS

Technical specifications

Supply Of Power

DC 5 V – 24 V; over
A) 2-pin, pluggable screw terminal (12 A max.), B) 5 V USB, C) Port 1 or 2 sourced from LEDs;
6 A max. load per port when supplying through to LEDs

Power Consumption

< 1.5 W (300 mA) during normal operation (500 mA max. fused)

Network Protocols

Art-Net (I, II, 3, 4, incl. ArtSync), Streaming ACN (sACN / ANSI E1.31)

Data Output

8x 512 channels SPI TTL (Maximum output per port: 680 RGB LEDs / 512 RGBW LEDs / 2048 1-channel LEDs)

Supported LEDs

APA101, APA102, APA104, APA106, GS8206, GS8207, GS8208, GW6201, GW6205, LPD1882S, LPD6803, LPD8806, MBI6024, MBI6120, MY9291, P9883, SJ1221, SK6112, SK6805, SK6812, SK6813, SK6822, SK9816, SK9822, SK9826, SM16703, SM16716, TLC5973, TLS3001, TLS3008, TM1803, TM1804, TM1809, TM1812, TM1814, TM1829, UCS512B3, UCS1903, UCS2603, UCS2903, UCS2904, UCS5603, UCS8904, UCS9812S, VS17822, WS2801, WS2803, WS2811, WS2811S, WS2812, WS2812B, WS2813, WS2814, WS2815, WS2818, WS2821, WS2822S, WS2822S Addressing

As of January 2023. Additional LED types will be supported with future firmware updates. Multiple frequencies are often available per type.